1. Download and open the HDM.
2. Select Device Scan from Devices menu.
3. Select the checkbox of all devices or click on the “Sel” header to select all devices.
4. From the Device menu, select Add/Pwd for Access to perform actions and enter the password.
5. Select the device that is already configured.
6. Go to Actions Tab.
7. Select Config Upload/Download and select Get Config.
8. This will be saved in the default folder HDM Install Folder Under the units MAC address.
9. Select devices to upload Config to.
10. Select Actions / Config Upload/Download and pick upload settings for the unconfigured devices.
11. Upload selection will bring you to the HaloDevMan folder select Downloads.
